Pentax Optio W60 - Page 107

105
4
Taking Pictures
1 Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23) to select [Recorded
Pixels].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to change the number of recorded
pixels.
5 Press the 4 button.
The Recorded Pixels setting is saved.
6 Press the 3 button.
The camera returns to capture status with the current setting.
Selecting changes the horizontal aspect
ratio of the image to 16:9.
The shooting screen is shown on the right.
• Images taken in Y (Frame Composite) mode are fixed at h.
• The number of recorded pixels for images captured in (Digital
Wide) or 4 (Digital SR) mode is fixed at f. (However, the
number of recorded pixels will be h if you exit the Digital Wide
mode without taking the second picture.)
• If you take and save only the first frame in F (Digital Panorama)
mode, the number of recorded pixels fixed at i.
• When drive mode is set to c, the number of recorded pixels is set
to f (2592×1944), and when the shooting mode is set to , the
number of recorded pixels is set to V (1280×960).
Recorded Pixels and Quality Level of Still Pictures 1p.34
Shooting and Playback Screens When Is Selected
7.5 M
7 M
5 M
3 M
1024
640
10 M
MENU OK
12
OK
OK
OK
Cancel
Cancel
Cancel
Storage Capacity
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
7.5 M
Shooting screen
38
3 8
38
07/07/2008
0 7/07/ 2 0 0 8
07/07/2008
14:25
1 4:25
14:25
7.5 M