113
4
Taking Pictures
3 Press the four-way controller (5).
The pull-down menu appears.
4 Use the four-way controller (23)
to select the sensitivity.
When [400] is highlighted, press the four-
way controller (3) to display [800], [1600],
[3200], and [6400].
5 Press the 4 button.
The sensitivity setting is saved.
6 Press the 3 button.
The camera returns to capture status with the current setting.
5 Select [AUTO] and press the four-
way controller (5).
The ISO Correction in AUTO range
selection screen appears.
Selecting the Sensitivity
• When the shooting mode is set to , the camera automatically
adjusts from 50 to 6400. The values can be changed.
• When the shooting mode is set to 4, only AUTO 6400 (50-6400)
is available.
• ISO sensitivity is set to 50 when shooting mode is set to y. Other
values cannot be set.
• [3200] and [6400] are unavailable when is selected for
recorded pixels.
• When Sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f.
• When the shooting mode is set to C (Movie) or (Underwater
Movie), only AUTO (sensitivity 50 - 800) is available.
Selecting the Sensitivity and Correction Range
OKMENU
1/3
400
200
100
50
10
M
AUTO
800
OK
OK
Cancel
Cancel
Rec.Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
7.5
M
OKMENU
1/3
400
200
100
50
10
M
AUTO
800
OK
OK
Cancel
Cancel
Rec.Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
To Next Page
Loading...
