Pentax Optio W60 - Setting the Autofocus Conditions

115
4
Taking Pictures
You can set various conditions for autofocus.
1 Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23) to select [AF Setting].
3 Press the four-way controller (5).
The AF Setting screen appears.
You can change the autofocus area (Focusing Area).
Focusing Area
4 Press the four-way controller (5).
The pull-down menu appears.
5 Use the four-way controller (23)
to change the Focusing Area.
6 Press the 4 button.
The AF Setting is saved.
7 Press the 3 button twice.
The camera returns to capture status with the current setting.
Setting the Autofocus Conditions
Setting the Focusing Area
J
Multiple Normal autofocus area
K
Spot The autofocus area becomes smaller.
W
Automatic Tracking AF Keeps moving subjects in focus.
MENU
MENU
1/3
10 M
AWB
AUTO
800
Rec.Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
Exit
3 button
Four-way controller
4 button
AF Setting
Focusing Area
Focus Limiter
MENU
OK
OK
Cancel