EasyManua.ls Logo

Pentax Optio W60 - Recording a Movie from Pictures Taken at a Set Interval (Interval Movie)

Pentax Optio W60
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
137
4
Taking Pictures
In this mode, you can record multiple still pictures taken automatically at
a set interval from a set time, as a movie file.
1 Press the four-way controller (2) in C or mode.
2 Use the four-way controller (45)
to select k (Interval Shoot) and
press the 4 button.
The current Interval Movie setting appears
for approximately one minute. To take
pictures with the current setting, go to Step
10.
3 Press the 4 button while the setting is displayed.
The Interval Movie setting screen appears. [Interval] is marked with the
frame.
Recording a Movie from Pictures Taken at a Set
Interval (Interval Movie)
Interval
You can set this to 1 minute, 5 minutes, 10 minutes, 30 minutes, or
1 hour.
Total Time
Set the total time, from 10 minutes to 359 hours. The total time and
the settable units change depending on the interval set. The Interval
can be set in increments of 1 minute, 5 minutes, 10 minutes, 30
minutes, or 1 hour.
Start Delay
Set the start delay, from 0 minutes to 24 hours. The start delay can
be set in increments of 1 minute for a delay time up to 59 minutes,
and increments of 1 hour for a delay time longer than one hour. If
the start delay is set to 0 min., the first picture is taken as soon as
the shutter release button is pressed.
MENU
Four-way controller
4 button
Shutter release button
MENU
1/3
10
M
AWB
AUTO
800
Rec.Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
Exit
OK
MENU
OK
OK
OK
Cancel
Cancel
Cancel
Drive
ve
Mode
Interva
va
l Shoot
Drive Mode
Interval Shoot

Table of Contents

Related product manuals