102
3
Taking Pictures
6
Press the 4 button.
The frame appears on the display.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (p.80).
7
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
8
Press the shutter release button fully.
The picture is taken.
• The number of recorded pixels is fixed at h (2048×1536)/
h (1920×1080).
• You cannot turn off the LCD by pressing the 4/W button in
N (Frame composite) mode.
• At shipment, the camera includes 3 default frames for each aspect
ratio (4:3 and 16:9). (The CD-ROM supplied with the camera contains
a total of 90 frames, including the default frames.)
Optional Frames
The optional frames are stored in the CD-ROM (S-SW117) supplied with the
camera. To use these frames, copy them from the CD-ROM. These optional
frames are deleted if the files on the built-in memory are deleted with a
computer or if the built-in memory is formatted.
Adding a Frame to a captured image 1p.204
38
OptioWG1_eng.book Page 102 Friday, March 11, 2011 4:10 PM
To Next Page
Loading...
