Pentax Optio WG-2GPS - Setting the Alarm

178
7
Settings
12 Change the time in the same way as in steps 7 to 11.
If you selected [12h] in step 6, the setting switches between am and pm
corresponding to the time.
13 Press the four-way controller (3) to select [Settings
complete].
14 Press the 4 button.
The date and time settings are saved and the screen returns to the [W Setting]
menu.
You can set the alarm to ring at a specified time.
You can choose whether the alarm will ring at the same time every day or only
once at the set time.
1 Use the four-way controller (23) to select [Alarm] on the
[W Setting] menu.
2 Press the four-way controller
(5).
The Alarm screen appears.
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23) to select the alarm.
Choose from [Off], [Once], or [Everyday].
5 Press the 4 button.
6 Press the four-way controller (3).
The frame moves to the [Time] field.
When you press the 4 button in step 14, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time signal (on
the TV, radio, etc.) reaches 00 seconds.
Setting the Alarm
Setting the Alarm
MENU
Time
00:00
Settings complete
14:14
Alarm
Alarm
Off
Cancel