212
8
Connecting to a Computer
Connecting to a Macintosh
Connect your camera to the Macintosh using the provided USB cable.
1
Turn your Macintosh on.
2
Turn your camera off.
3
Connect your camera to the Macintosh using the USB cable.
Connect the terminal of the USB cable with arrow mark facing the front side
of the camera.
4
Turn your camera on.
The camera is recognized as [NO_NAME] on the desktop.
Connecting the Camera and Your Macintosh
We recommend using the optional AC adapter kit K-AC117 when the camera
is connected to the computer (p.37). If the battery runs out of power while
images are being transmitted to the computer, the image data may be lost or
damaged.
• If the SD Memory Card has a volume label, the volume label name appears
instead of [NO_NAME]. A new unformatted SD Memory Card may show
the manufacturer’s name or model number.
• The power lamp is lit while the camera is connected to a Macintosh, and it
blinks while the card is being accessed.
To Next Page
Loading...
