40
1
Getting Started
1
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide the cover
towards 2 and open it towards 3.
2
Insert the SD Memory Card into the SD Memory Card socket
so that the label is facing toward the front of the camera (the
side with the lens).
Push the card in all the way. Images and sound may not be recorded correctly
if the card is not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
3
Close the battery/card cover.
Push down and slide the battery/card cover with steady but gentle force in the
opposite direction indicated by 2.
If the battery/card cover is not locked securely when you close it, water, sand,
or dirt may get into the camera.
• The file size differs depending on the number of recorded pixels of the
images and the number of the recordable images to the SD Memory Card
also differs.
•
Set the number of recorded pixels for still pictures from [
A
Rec. Mode]
menu and for movies from [
C
Movie] menu.
•
For an approximate number of recordable images or time that can be saved
on an SD Memory Card, see “Main Specifications” (p.234).
SD Memory Card
Battery/card cover
SD Memory Card
socket
To Next Page
Loading...
