Pentax PTS-III 05 - User Manual

Specifies measuring ranges, accuracy, and time for distance measurements.

Details specifications for angle measurement methods and minimum counts.

Instructions for setting up the instrument and tripod for surveying.

Step-by-step guide for leveling and centering the instrument using optical plummet.

Detailed steps for leveling the instrument using the plate vial.

Methods and steps for measuring horizontal and vertical angles.

Steps for measuring horizontal and vertical angles clockwise.

Steps for measuring horizontal angles counter-clockwise.

Procedures for measuring distances using various modes.

Instructions for distance measurement in fine mode using units like mm or foot.

How to perform stake-out measurements and compare with set distances.

Procedures for obtaining coordinate values of objects.

Steps to input the instrument's own coordinates (station point).

How to measure coordinates of an object relative to the instrument.

Configuration and operation of internal switches.

Guide to operating and resetting internal switches for configuration.

Lists common error codes and their meanings and solutions.

Checks and adjusts the vertical zero point error of the instrument.

Adjusts the vertical compensation offset for accurate angle readings.

Measures horizontal and vertical distances between two points.

Measures coordinates of points using instrument and backsight data.

Calculates horizontal/vertical angles and distances between points.

Measures the height of targets that cannot be directly accessed.