19
3. Insert the memory card into the memory card
slot as shown in the figure, push exposed edge
of the memory card fully into the slot with your
fingertip.
4. Close the battery cover as shown in step ①
and slide the battery cover as shown in step
②. Make sure that a red mark appears on the
battery cover lock lever and that the battery
cover is securely closed.
Write Protection
Toggle Switch
2
A memory card (SD / SDHC / SDXC) is necessary to store photos and videos and not included in all
camera packaging. It needs to be purchased separately. Please use a memory card which is Class 6 or
higher and has a capacity of 4 GB to 512 GB.
To remove your memory card, open the Battery cover, gently press the memory card to eject it and
remove it carefully.
To Next Page
Loading...
