Need help?Do you have a question about the Pentax Winder ME and is the answer not in the manual?
General| Film Advance | Automatic |
|---|---|
| Type | Winder |
| Compatibility | Pentax ME |
| Frame Rate | 2 frames per second |
| Shooting Speed | Approx. 2 fps |
| Battery | 4×AA batteries |
Identifies trigger and shutter release buttons on the camera body.
Identifies winder's trigger, grip, film transport coupler, and camera body cover.
Instructions for removing and replacing the battery compartment cover.
Procedure for attaching the Winder ME to the Pentax ME camera.
Ensuring correct release lever position before attaching the winder.
Precautions to prevent accidental movement of the winder's release lever.
Guidance on setting the C/S Dial for single-frame or consecutive exposures.
Explanation of the red LED's illumination for confirmation of operation.
Procedure for loading film and making initial blank shots.
Ensuring correct synchronization between camera and winder dials.
Instructions for initiating the film rewind sequence.
Explanation of viewfinder LED behavior during operation.
Consequences of using the camera body's shutter release instead of the winder's.
Notes on usable shutter speeds and handling Bulb (B) exposures.
Cautions regarding battery performance at low temperatures or when exhausted.
Information on securing the winder to a tripod using the provided socket.
To Next Page
