Pentax ZOOM 105-R - Page 16

When you press the shutter release button halfway, the
lamps 0 / AFl and/or0 ( ^ | shown above glow or flicker
o Green lamp ( AF )
When It glows, the subject is m focus. Or, with the
focus lock function, focus and exposure are
temporarily locked (refer to page 16).
O Red lamp ( ^ )
When it glows, flash is ready to fire. When it flickers,
flash iS being charged
Note;
• If the green lamp ( AF ) flickers, the subject is too close.
Adjust the camera-to-subject distance so that the green
tamp I AF ) glows, then release the shutter.
®
Press the illumination button ( jiS}) to illuminate the LCD
panel so that It may be seen in the dark. The illumination
continues for approx. 8 seconds after the button is
pressed. While the zooming lever and the mode, drive,
SETTING, and shutter release buttons are being operated,
the LCD panel illumination remains on even after 8 sec.
passes