Pentax Zoom 280-P - Page 13

4
&
4 After the back cover is closed, the film auto¬
matically advances to the first frame.
* Even if no film is loaded, the motor oper¬
ates for a second or two after the back
cover is closed.
CL)
5 When ( I ) appears in the exposure counter
on the LCD panel, the film automatically
stops winding. The indication appears as
shown above. If (/) does not appear on the
LCD panel, it indicates that the film is not
properly loaded. If this occurs, reload the
film. If (E) blinks on the LCD panel, it
means the film is not properly loaded.
* The exposure counter Indication will re¬
main on even if the main switch is turned
off.
Ensure the film is taut as illustrated on the previous page. Take up any slack in the film by
pushing it back into the cartridge.
If the end of the film leader is extremely bent, straighten it or cut off the bent portion.