Pentax Zoom 70-R - Unloading film

8. UNLOADING RLM (Be sure to remove
D
D After you have exposed the last frame of the roll,
film rewinds automatically. Then, the motor stops,
and (00) flickers as shown to indicate end of
rewind.
B Open the back cover, and remove the cartridge from
the chamber by pulling on its top with your fingertip
as shown.
Notoe:
• During rewinding, the exposure counter counts frame
numbers in reverse.
• A 24-exposure film roll takes about 20 seconds to be
rewound.
• The entire roll of film including the film leader Is
always rewound Into the cartridge to avoid leakage
of light onto any part of the film.
@