Pentax Zoom 90 - Page 15

D Close the back cover. The film automatically advances
to the first frame. (Even if no film is loaded, the motor
operates for a second or two after the back cover is
closed.)
H When 'T ” appears in the exposure counter on the LCD
panel, the film automatically stops winding. The indica¬
tion seen above appears.
Notes:
• If ”1" does not appear on the LCD panel, the film Is not
properly loaded. Reload the film.
• After the shutter is released for each exposure, the film
automatically advances to the next frame, unless the
camera is in Multi-Exposure mode.
@