Pentax Zoom 90 - Troubleshooting

What appears troublesome might be easily remedied.
Here are some problems and their remedies.
. The shutter cannot be released.
Is the main switch turned off (O so, turn It on ( | ).
(See page 3.)
Are the batteries exhausted or are they loaded?
Replace them or insert new batteries. {See page 37.)
Is your subject out of the focusing range? Shoot in the
range of one meter to infinity for ordinary photography
and 0.6 to 1 meter for macro photography. (See pages
10 and 12.)
Are you operating the zooming lever? If so, release your
fingers from the zooming lever, then shoot. (See page
13 .)
*s ( 00 ) flickering on the LCD panel? If so, the film is
finished. Replace it with a new roll. (See page 16.)
2. My printed pictures don’t look very clear.
• Did you position the autofocus frame (2) on your sub¬
ject? (See pages 12 and 14.)
• Did you press the shutter release button gently while
taking care not to obstruct the autofocus window With
your fingers or hair? (See page 4.)
3. Zoom lens does not move.
• Are you continually pressing the shutter release button?
If so, the zoom lens cannot operate. Take your finger off
the shutter release button.