Pentax ZX-M - Memory Lock Function

ADVANCED
OPERATIONS
4 MEMORY LOCK FUNCTION
Purpose;
The memory lock function enables an exposure
level to be memorized before shooting. Use the
memory lock function to get a correct exposure
from a neutral mid-tone area of a high-contrast
scene.
To set the Memory Lock;
1. Position the area to be measured in the
viewfinder metering area and depress the
memory iock button [ ML ]. [ # ] is dispiayed
in the viewfinder and an audible PCV signal
can be heard. The measured exposure level
is memorized for 10 seconds.
2. Recompose the image in the viewfinder and
take the picture.
Note;
If the shutter button is depressed halfway down
while the memory lock timer is operating, the mem¬
orized meter reading will remain even if the memo¬
ry lock button is released.
To cancel the memory lock function, depress the
memory lock button ( ML ] again.