Pentax ZX-M - Data Back: Adjusting Year, Month, Day

ADVANCED
OPERATIONS
6 DATA BACK (optional)
If you have purchased your camera as the "Date" version,
or If you have purchased the Data Back separately, the fol¬
lowing section applies.
O DATE button
© SELECT button
© ADJUST button
Notes:
• Carefully press the button with the protrusion part of the
camera’s strap clamp. Do not press the buttons with an
object having have a sharp tip.
Adjusting the year / month / day
1. Press O the DATE button repeatedly until the date
is displayed.
2. Press © the SELECT button to make the year,
month, or day you want to change blink. The digits
blink in the following order.
Year - Month - Day - Year
3. Change the date with © the ADJUST button. The
digit increases by one each time the ADJUST but¬
ton is depressed. Holding the button for about 2 to
3 seconds will change the digits continuously.
4. Press © the SELECT button to stop the digit from
blinking, after you have changed the date. The
adjusted date has been entered.