Pepperl+Fuchs IDM-Z1-264-M-2D-J1-BT-N-N0 - Page 20

2022-12
20
IDM-Z1-264-M-2D-J1-BT-N-N0, IDM-Z1-164-M-1D-J1-BT-P-N0
Commissioning
Using the base station in non-explosion-hazardous areas - system
structure 2
1. With a non-explosion-protected base station, charging in non-explosion-hazardous areas can
be performed using the PSU-IDMx61-BC-N0-N0 power supply. The cable is plugged into the
opening for this at the bottom of the base station. For a base station for explosion-hazardous
areas, this connection is sealed at the factory.
Figure 5.9 Connecting the power supply for the non-explosion-hazardous base station