Perel FT120C - Page 10

FT120C/FT130C
V. 05 – 23/04/2020 10 ©Velleman nv
Other control options (multiple selections possible)
room temperature control, with presence
detection
no
Room temperature control, with open window
detection
no
with distance control option
no
with adaptive start control
no
with working time limitation
no
with black bulb sensor
no
Permanent pilot flame power requirement
Pilot flame
power
requirement (if
applicable)
P
pilot
0
kW
Contact details
Velleman NV
Legen Heirweg, 33 9890 Gavere, Belgium
(*) NO
x
= nitrogen oxides
FT130C
power.................................................................................................................... 30 kW
heat output ................................................................................................... 10236 BTU/h
fuel tank capacity ...................................................................................................... 38 L
heating surface ..................................................................................................... 500 m²
fuel consumption ................................................................................................. 2.80 L/h
air flow .............................................................................................................. 720 m³/h
dimensions ........................................................................................ 880 x 456 x 590 mm
weight .................................................................................................................... 21 kg
Information requirements for gaseous/liquid fuel local space heaters
Model identifier(s): FT130C
Indirect heating functionality: no
Direct heat output: 30 (kW)
Indirect heat output: N.A. (kW)
Fuel
Space heating emissions (*)
NO
x
Select fuel type
liquid
kerosene
69 [mg/kWh
input
] (GCV)
Item
Symbol
Value
Unit
Item
Symbol
Value
Unit
Heat output
Useful efficiency (NCV)
Nominal heat
output
P
nom
30.0
kW
Useful efficiency at
nominal heat output
η
th,nom
100
%
Minimum heat
output
(indicative)
P
min
N.A.
kW
Useful efficiency at
minimum heat output
(indicative)
η
th,min
N.A.
%