Perel TC90602 User Manual

TC90602
V. 03 – 15/07/2019 6 ©Velleman nv
4. Overview
Refer to the illustrations on page 2 of this manual.
1
handle
7
hose
2
blowing connection
8
suction connection
3
top cover
9
metal barrel cap
4
metal clip
10
on-off switch
5
ash collector
11
washable HEPA filter
6
aluminium suction nozzle
5. Assembly
1. Before using the ash cleaner, make sure all accessories are correctly fastened.
2. Unfasten the fixing clips and remove the cover from the ash collector.
3. Attach the filter to the lower part of the cover.
4. Replace the cover on the ash collector and fasten the fixing clips.
6. Use
General Use
1. Before using the ash cleaner, make sure to install the filter and to fix the cover to the
collector with the clips.
2. Attach the flexible hose to the ash collector.
3. Connect the appliance to the mains. Switch on the appliance.
Vacuuming Ashes
Leave the ashes to completely cool down prior to vacuuming them!
1. Check if the device is assembled well before using it.
2. To vacuum ashes, connect the hose to the suction connection.
3. Insert the power plug into the mains socket.
4. Switch on the device.
5. Vacuum the cold ashes.
6. Switch off the device.
7. Unplug the device from the mains.
8. Remove the cover from the ash collector.
9. Throw away the ashes in an environmentally safe way.

Perel TC90602 Specifications

General

Brand	Perel
Model	TC90602
Category	Vacuum Cleaner
Language	English