VTBAL405
V. 01 – 02/10/2018 5 ©Velleman nv
6. Operation
6.1 General Operation
1. Place the scale on a solid, level and non-slippery surface.
2. Adjust the feet to make sure the scale is level.
3. Switch on the scale. The scale is ready-to-use when the
display shows 0.
4. Place the item to be weighed or the tare item in the middle
of the weighing platform.
5. To tare an item, tap the tare button. Place the item to be
weighed on the scale.
6. The weight is displayed.
6.2 Unit Conversion
Press the unit button until the desired weighing unit is displayed.
6.3 Piece Counting
1. Hold the piece-counting button pressed.
2. Press the unit button until the display shows the sample
amount (25, 50, 60, 75 or 100). Place the same amount of
items in the middle of the weighing platform. Press the
piece-counting button to confirm.
3. To count the amount of pieces, press the piece-counting
button, place the items in the middle of the weighing
platform and read the results from the display.
6.4 Error Indications
Overloaded. Remove excess weight.
To Next Page
Loading...
Need help?
General
