Product Manual
NATURAL GAS DETECTOR
GA0080
Safety Precaution,
Consideration
Do not let the device get wet.
Make sure that batteries are correctly installed.
Do not drop the device.
Do not use near re or high temperature
locations.
Please take out the batteries when
device will not longer be used for a long
period of time.
Product will shut down automatically
when battery power is low.
Do not disassemble the product.
Avoid straight wind ow from electrical
appliances like electric fans.
Avoid contact with ethanol, perfume or
gas like H2S, CO, SO2 and smoke:
To prevent disturbance on the sensor of the detector with
high precision.
To locate average concentration in an
area, take several readings from dierent
spots and take the average.
Please handle the battery waste
properly according to local laws and
regulations.
•
Flammable Gas Concentration
< 2500 ppm
→
Green light turns on.
•
2500 ppm ≤
Flammable Gas Concentration
< 4000 ppm
→
Yellow light turns on.
•
Flammable Gas Concentration
≥ 4000 ppm
→
Red light turns on.
Flammable Gas
Concentration
Do not contaminate or block the
detection window to maintain high
sensitivity.
Since Natural Gas is highly ammable
and highly toxic to human, it is
necessary to monitor gas leakage to
ensure safety, especially in places like
kitchens, service stations, storehouse
and gas stations.
This Natural Gas Detector can be
utilized for verifying any leakage from
any sources within a few minutes, the
product is easy to use with only one
button to start analyzing.
1
4
3
5
2
6
Beware of the +/-
poles of the batteries
Tips
Introduction
Model Number
Detects
Detection
Technology
Detection Range
Resolution
Product Description
GA0080
Natural Gas
Catalytic method
gas sensor
0-9999 ppm
100 ppm
Reference
LCD Backlight
Display
On/O
360° Array
Detector Ports
Three color
Indicator lights
Battery
Lanyard mouth
1
2
3
4
5
6
To Next Page
Need help?
General
