Performance Tool W85008 User Manual

3
• Adjustable wrench • Hammer and block of wood or rubber mallet • slotted screwdriver
PACKAGING CONTENTS
PACKAGING CONTENTS
1 Seat Cushion with
Lifting Lever 1
2 Lifting Unit 1
3 Tool Tray Assembly
(5 pc 2 1/2 casters attached) 1
# Description Quantity
2
3
1
1. Loosen fasteners (B).
2. MAKE SURE the tray is on a rm surface with
the wheels down. Insert the lifting unit (C)
into the tool tray hole (E). The bigger end of
the lifting unit (C) is the end that inserts into
the tool tray hole (E). It might be necessary
to seat the lifting unit (C). Do this by holding
a block of wood over the top of the lifting unit
and gently tapping with hammer to seat the
lifting unit. NOTE: It might be easier to position
the tray (D), wheels down, on the grass or a
surface that is not smooth.
3. ATTACH the seat (A) to the lifting unit (C)
4. MAKE SURE all fasteners are tightened (B).
NOTE: It is recommended you take the time to
make sure that the casters (F) are tight.
5. TO RAISE seat, stand next to stool. Lift
handle, and release when seat is at the
desired height.
6. TO LOWER seat, sit on the stool. Lift handle,
and release when the seat is at the desired
height.
ASSEMBLY INSTRUCTIONS
A
B
C
B
D
E
F
Fig. 1

Performance Tool W85008 Specifications

General

Brand	Performance Tool
Model	W85008
Category	Indoor Furnishing
Language	English