Performance Tool W85020 User Manual

3
• Adjustable wrench • Hammer and block of wood or rubber mallet • slotted screwdriver
PACKAGING CONTENTS
RECOMMENDED TOOLS FOR ASSEMBLY (sold separately)
1 Seat Cushion with
Lifting Lever 1
2 Lifting Unit 1
3 Tool Tray Assembly
(5 pc 2-1/2 casters attached) 1
# Description Quantity
2
3
1
1. Remove parts from box and inspect carefully
for any damage that may have occurred
during transit.
2. MAKE SURE the tray is on a rm surface with
the wheels down. Insert the lifting unit (B)
into the tool tray hole (C). The bigger end of
the lifting unit (B) is the end that inserts into
the tool tray hole (C). It might be necessary
to seat the lifting unit (B). Do this by holding
a block of wood over the top of the lifting unit
and gently tapping with hammer to seat the
lifting unit. NOTE: It might be easier to posi-
tion the tray, wheels down, on the grass or a
surface that is not smooth.
3. ATTACH the seat (A) to the lifting unit (B)
4. TO RAISE seat, stand next to stool. Lift
handle, and release when seat is at the
desired height.
6. TO LOWER seat, sit on the stool. Lift handle,
and release when the seat is at the desired height.
ASSEMBLY INSTRUCTIONS
A
B
C
Fig. 1

Performance Tool W85020 Specifications

General

Brand	Performance Tool
Model	W85020
Category	Indoor Furnishing
Language	English