Performance Spin Doctor - Workstand Folding; Clamp Mechanism Adjustments; Height Adjustment

CLAMP MECHANISM HEIGHT ADJUSTMENT
1.Unscrew the handle counterclockwise (G) (fig.7), holding the top tube (H)
firmly. After reaching the required height (fig.8), secure the top tube by turning
the handle clockwise (G) (fig.9).
9
8
7
FOLDING THE WORKSTAND
1. Pull the safety slider (I) and, keeping it in
the release position (fig.20), flip the clamp
mechanism (M) upwards (fig.21).
2. Unscrew the clamping handle (G) (fig.22),
lowering the top tube (H) (fig.23). Secure the top
tube by turning the handle (G) (fig.24).
22
20
21
23
24