pergomondo 2001017 - Assembly Requirements; Wall Mounting Guidance

26
www.pergomondo.de
Safety instrucons
Storage
The packaging of the product must be protected
against wet and damp. Soaked packaging can come
loose and cause accidents.
The product must be protected against penetrang
damp when in storage!
The cartons must be stacked and unstacked so that
they do not prove a hazard to persons due to pping
over or rolling out of posion.
Only create storage facilies and stacks that can
securely take the load. Ensure that the permissible
loads of shelves and other load-bearing components
are not exceeded. You must comply with the general
goods storage principles.
Assembly
You need the following equipment in order to gua-
rantee that the product is properly ed, and there-
fore the opmal funconing of the nished product:
• Cordless screwdriver
• Complete tool set
• Gloves
• Silicone
• Equipment for working at height (scaolding,
ladders, cherry picker, etc.), that meet the cur-
rent individual occupaonal health and safety
standards.
Ensure that all screws are ghtened evenly. A gre-
ater ghtening force may damage the components
and/or the stainless-steel screws.
Uneven ghtening can result in tension in the alu-
minum and cast components as well in the brickwo-
rk and therefore lead to failure of the aachments.
Assembly must be carried out in accordance with
the applicable guidelines and standards for occupa-
onal safety.
Check all equipment (scaolding, ladders, tools,
etc.) and safety equipment (belts, ropes, etc.) before
the use. Always use suitable protecve equipment
(gloves, safety boots, goggles, hearing protecon,
etc.).
Wall mounng
Selecng the most appropriate fastener depends on
the type of wall and its physical condion. Before
installing the pergola, please check the condion of
the wall.
The mounng material for wall mounng is not
included in the scope of delivery.
Fastening material
The wall mounng set is delivered without fastening
material!
The mounng material must be selected by the in-
staller for the exisng mounng surface and tailored
to the requirements of the system and the mounng
surface.
The required dowel pull-out forces must be strictly
adhered to. We assume no liability for the fastening
material. The installer alone is liable for ensuring
that the fastening material is suitable for the respec-
ve installaon surface and that the installaon is
carried out professionally.
The respecve installaon instrucons from the
dowel manufacturers must be observed!
Cleaning and care instrucons
Temperature uctuaons and humidity can lead
to the formaon of condensaon in or outside the
product, which does not mean that the product is
leaking.
Check the stability of your pergola periodically,
especially in autumn and winter. Remove leaves,
stones, branches, and other objects from the pergo-
la. As soon as snow accumulates on the roof, it must
be removed immediately.
There are no warranty claims in the event of we-
ather-related damage such as snow or storms.
Do not use strong cleaning agents such as solvents
or corrosive liquids to clean your pergola. Wipe it
with a damp cloth.
Warning
Keep packaging materials out of the reach of child-
ren and dispose them immediately. There is a risk of
suocaon.
If it turns out unexpectedly that your product is
defecve or parts are missing, please contact our
customer service. Please have your order number
ready.
Our team will be happy to answer any further ques-
ons you may have, e.g. about the many extension
opons of our pergola.
i