TPD1317e Chapter 8
Page 57
Run
8.3 M135 and M130C Engines
Figure 4 shows the position of the speed selector lever on the injection pump.
An electric stop is tted as standard equipment, but a mechanical stop is also supplied. The injection pump is
tted with a stop lever, identied in gure 2, which may be connected by a piano wire type cable assembly to
a position near the boat operator.
Gearboxes supplied at the time that the engine is purchased will be tted with connections to suit Morse 33C
cables.
Stop
Speed selector
lever
Idle
Figure 4 - Speed selector lever and stop lever
Full
speed
Stop
lever
To Next Page
Loading...
