Perlick Residential Refrigeration - Temperature Controller

www.bringperlickhome.com
35
TEMPERATURE CONTROLLER
Turns on/off the power to the unit
Disabled
Manually defrosts the unit by holding
button down
For 3 seconds
Displays minimum stored temperature, also
used for navigating control codes and
changing displayed values within the
various menu options
Primary Key Functions
Displays maximum stored temperature,
also used for navigating control codes
and changing displayed values within the
various menu options. Fast freezing
cycle is started by holding button down
for 3
Displays and allows for modification of
target set point. Used to select a
parameter or confirm an operation in
programming mode. If held for 3
seconds while max or min temperature is
displayed, it will erase that temperature
from memory.
ON
FLASHING
FLASHING
ON
FLASHING
ON
ON
ON
L.E.D. Alerts
SYMBOL
STATUS
ALERT DEFINITION
The compressor is running
Anti-short cycle delay enabled. (Programming phase when flashing with
)
See above in parenthesis ( ).
The defrost is enabled
Drip time in progress
The fast-freezing cycle is enabled
Alarm signal: Contact Service Representative immediately
The light is on