Copyright © 2019, Petique, Inc., All Rights Reserved.
|
10
|
Assembly
TIRE INFLATION
13. Check tire pressure before using the stroller. DO NOT INFLATE above the
maximum recommended ination pressure that is on the side of the tire (Rear
wheels 30 PSI/Front wheel 35 PSI). Over ination may cause the tire to blowout
and could result in serious injury. NOTE: Recommended to use hand pump. Air
compressor can be used with caution to inate the tires, however Petique Inc is
not liable for damage to tires caused by air compressor.
RAIN COVER (OPTIONAL)
14. Release the four rear attachments of the rain cover and place the rain cover over
the stroller (Fig. 14a). Attach the four rear attachments (Fig. 14b). Place the front
rain cover hook around the front wheel axle to secure the rain cover (Fig. 14c).
Fig. 14a Fig. 14b Fig. 14c