Within the period of warranty, if the product fails with no fault of user operations, it will be
repaired at Petoneer's expense. The warranty will not cover product failure in examples below:
1). Intentional damage to the product by the user or third party
2). Failure to operate or maintain the product following the (QIG) Quick Installation Guide
Instructions.
3). Failure by natural wear and tear including but not limited to scratching, corrosion, oxidation
and rusting.
4). Failure by non-authorized repair of the product including but not limited to user's own or
third-party repairing attempts or modifications.
All Pictures shown in the manual are for illustration purpose only.
Actual product may vary due to product enhancement.
Nutri Vision
Smart Pet Feeder with Camera
User Manual
Please read this manual carefully before using.
Keep the manual in a safe place for future reference.
Environmental Conditions
Operating Temperature: 14 °F to 131 °F, (-10 ºC to 55 ºC) (indoor only)
SkyRC Technology Co., Ltd. declares that this Nutri(FDW020), is in compliance with the
essential requirements and other relevant provisions of the Radio Equipment Directive
(2014/53/EU).
Environment friendly disposal
You can help protect the environment!
Please remember to respect your local regulations: dispose of nonfunctional electrical
equipment with an appropriate waste disposal center.
Manufacturer: SkyRC Technology Co., Ltd.
4, 5, 8 Floor, Building 4, Meitai Science Park, Guanguang Road, Guanlan, Longhua District,
Shenzhen, China.
Read all the instructions
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Do not touch hot surfaces. Use handles.
2. To protect against electric shock do not immerse cord, plug into water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or
taking off parts, and before cleaning the appliance.
5. Do not operate any appliance with a damaged cord or plug, should the appliance
malfunction, or if it has been damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.
6. The use of the accessory attachments is not recommended by the appliance manufacturer
as it may cause injuries.
7. Do not use outdoors.
8. Do not let the cord hang over edge of table or counter, or touch hot surfaces.
9. Do not place on or near a hot gas or electric burner, or in a heated oven.
10. Always attach plug to appliance first, then plug cord inthe wall outlet.
11. Do not use the appliance for other than intended use.
12. WARNING: Never leave the appliance unattended whilst in use.
13. Warning: keep the supply cord away from heating tip and metal enclosure while using.
14. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instructions concerning use of the appliance by a person
responsible for their safety.
15. Children should be supervised to ensure that they do not play with the appliance.
16. If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
17. WARNING: This tool must be placed on its stand when not in use.
SAVE THESE INSTRUCTIONS.
For the purposes of supply by Adapter, only use the detachable supply unit provided with this
appliance:
Manufacturer: SHENZHEN KEYU POWER SUPPLY TECHNOLOGY CO., LTD.
Input: 100-240V, 50/60Hz, 0.4A
Output: DC 5V 2A
07 /
Warranty Terms
www.petoneer.com
Model: FDW020
This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This product generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular in stallation. If the product does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the product.
FCC Instructions:
06 /
Certifications
To Next Page
Need help?
General