Using the power adapter and Type-C power cable: Plug 5V power adapter
into a wall outlet, turn on the switch.
Using batte power: Install three D alkaline batteries into the batte
compament, turn on the switch.
Power Mode
Cable
Icon
Display
Always On
Note: Display automatically turn o
during 10: 00PM to 7:00AM
mins without operation
Always On
Notes
-When the power adapter, power cable, and batteries are used at the same time, the
feeder will only draw power via the power cable.
Connect Power
X3
during 10: 00PM to 7: 00AM
To Next Page
