MAINTENANCE INSTRUCTIONS! – Visit Petratools.com/petrahandheldatomizer for full instructions and videos.
• After each use, drain the remaining liquid and use ULV500 solution to clean your PETRATOOLS HD1
• When cleaning your PETRATOOLS HD1, do not use powder, as it may block filter net and nozzle which
may cause damage to the sprayer.
• You should store your PETRATOOLS HD1 in a safe location to ensure safety of personnel and
equipment.
OPERATING INSTRUCTIONS – Visit Petratools.com/start for full instructions and videos.
1. Open the lid by twisting
the green cap to the
right.
2. Fill the container with
your gardening solution
or ULV500 solution.
3. Close the lid by twisting it
to the left.
4. Manually pump the
pressure bar on top of
the lid to pressurize the
air against the liquid.
5. After pressurizing the
tank, press the spray
trigger and adjust the
brass nozzle according to
preferred water pressure
and distance.
6. To put into lock-in mode,
press and push the locking
trigger forward.
7. Pull the locking trigger back
to stop continuous spray.
1 2 3
4
5
6
7
To Next Page
