PetraTools HD4000 - Step 4: Attach Wand to Valve Handle; Step 5: Select and Attach Nozzle; Step 6: Prime the Pump; Step 7: Add Liquid Solution

2
3
STEP 4
Thread the wand onto the top of the valve handle nice and tight.
STEP 5
Select the nozzle of your choice and attach it on the wand. There are six nozzles
you can choose from depending on your spraying task.
STEP 7
Add the liquid solution of your choice through the mesh strainer in the lid.
Prime your sprayer pump before the first use. Turn on the pump and let it run
for several minutes to prime the system.
STEP 6