Need help?Do you have a question about the Pettersson D1000X and is the answer not in the manual?
General| Sampling Rate | 500 kHz |
|---|---|
| Input Channels | 1 |
| Battery Life | Up to 10 hours |
| Interface | USB |
| Type | Ultrasonic Bat Detector |
| Frequency Range | 10 kHz |
| Display | LCD |
| Headphones | 3.5 mm |
| Recording | Time Expansion |
Details Pettersson Elektronik's liability limits and customer indemnification.
Outlines intended use, restrictions, and safety notices for the product.
Provides an overview of the D1000X's capabilities and features.
Details the connectors and controls located on the front panel.
Identifies the connectors and switches on the rear panel.
Guides on installing the necessary D1000X Utility software on a PC.
Instructions for inserting batteries and CF card before initial operation.
Procedure for setting the internal system clock for accurate file timestamps.
How to format a CF card for use with the D1000X, either on PC or device.
Explains the principle of converting ultrasound to audible sound using heterodyning.
Describes the method of dividing ultrasound frequencies by a factor of ten.
Explains replaying ultrasonic signals at a slower speed to make them audible.
Overview of the D1000X's high-speed recording and playback capabilities.
Details configurable settings for recording, like mode, sampling rate, and triggers.
Explains how to start, capture, and end recordings manually using trigger events.
Describes the serial input for GPS receivers and service operations.
Explains viewing and cleaning recorded data files using the D1000X Utility.
To Next Page
