Need help?Do you have a question about the PEUGEOT 103 LS-U1 and is the answer not in the manual?
General| Fuel System | Carburetor |
|---|---|
| Engine Type | Single-cylinder, two-stroke |
| Transmission | Automatic |
| Top Speed | 45 km/h |
| Cooling | Air cooled |
| Brakes | Drum brakes (front and rear) |
Lists technical specifications like overall length, weight, and dimensions for various moped models.
Details the moped's frame construction, fuel tank, tool compartment, engine covers, luggage carrier, and fenders.
Describes the front fork, rear suspension, and front/rear drum brakes of the moped.
Provides specifications for the single-cylinder, air-cooled, two-stroke engine, including bore, stroke, and fuel mixture.
Explains the two parts of the clutch and the primary/secondary transmission systems.
Identifies and labels various controls and indicators on the moped's handlebars and body.
Explains the correct gas-oil mixture and estimates the moped's mileage on a full tank.
Details the three positions of the fuel valve (OFF, ON, RESERVE) and their usage.
Guides on how to adjust the seat height for optimal rider comfort and balance.
Instructions on how to change the position of the handlebars for rider comfort.
Lists recommended tire pressures and advises regular brake checks.
Explains drive knob position and checks for lights, stoplight, and horn.
Details the step-by-step process for starting the moped using the kick pedal.
Describes starting the moped by pedaling like a bicycle, suitable for downhill starts.
Instructions on post-start engine handling, choke release, and new engine break-in.
How to safely slow down, stop, and place the moped on its center stand.
Explains how to use the front fork lock to secure the moped.
Steps for preparing the moped for long-term storage to prevent damage.
Instructions on how to prepare the moped for use after a period of storage.
Details the schedule and method for cleaning and lubricating the drive chain.
Instructions on how to adjust the slack in the drive chain for proper tension.
Notes that the bicycle chain tensioner requires no adjustment.
Guidelines for cleaning the moped's chrome and enamel parts, including tar removal.
How to adjust the travel limitator on the oscillating engine for specific models.
Step-by-step guide to removing the front wheel for tire repair or replacement.
Detailed instructions on how to remove the rear wheel for tire repair or replacement.
Procedures for removing, patching, and reinstalling a tire and tube.
Addresses common engine starting problems like fuel supply and ignition switch issues.
Discusses fuel delivery problems, clogged jets, and when to consult a dealer for engine issues.
Covers troubleshooting for the stoplight and spark plug, including replacement advice.
Explains the function and operation of the headlight switch and ignition switch.
Guides on how to properly adjust the headlight beam for safe night riding.
Lists the types and specifications of bulbs used for headlights, taillights, and stoplights.
Instructions for removing and replacing headlight bulbs and taillight bulbs.
Emphasizes pollution control, avoiding modifications, and servicing by authorized dealers.
To Next Page
