Need help?Do you have a question about the PEUGEOT 208 R2 and is the answer not in the manual?
General| Brand | PEUGEOT |
|---|---|
| Model | 208 R2 |
| Category | Automobile |
| Language | English |
Details the functional inputs and switches on the BRK Dash panel.
Lists the specific inputs from the BRK Dash panel, including sensor data.
Specifies the outputs provided by the SRA-E system for various commands.
Details the inputs required for the MPDU system, such as pressure readings.
Lists the outputs from the MPDU system, including sensor power.
Specifies the inputs to the SRA-E system, covering sensors and control signals.
Identifies sensors crucial for smooth car operation and potential issues if they fail.
Details the information and controls available on the dashboard display.
Covers controls for lights (high beam/dipped) and wiper speed.
Explains the gearbox lock and control functions for shifting.
Refers to the Engine Control Unit (ECU) within the system's functions.
Details selection of driving modes and surface types.
Explains blinker functions, including hazard light activation.
Describes operation of parking lights, dipped beam, and stop lights.
Covers the starter function and engine fan test procedure.
Details the throttle mapping sequence and its related button.
Explains short/long press functions for scrolling pages and switching modes.
Describes how to activate the anti-fog lights.
Explains activation of high beam and interior/exterior lights.
Covers auxiliary functions like fuel tank draining.
Details the command procedure for unlocking reverse gear.
Explains the available pedal and throttle body mapping options for stage mode.
Details LED indicators for revs, upshift, and over-rev.
Explains alarm states indicated by LEDs 1 and 2.
Describes the information provided by LED 4 for fuel-saving gear shifts.
Lists the functions associated with the dashboard buttons.
Procedure for adjusting the barrel position sensor for correct gearbox operation.
Explains the consequences of CAN connection loss on system functions.
Details the operation and forced draining of the fuel pump.
Explains the radiator fan's operation based on water temperature.
Describes the engine crank procedure for oil pressure and VVT learning.
Outlines conditions required before starting the calibration process.
Details the step-by-step procedure for calibrating the throttle and pedal.
Specifies when calibration is necessary after component replacement or mapping changes.
Describes the content displayed on the starting page during system loading.
Identifies the software name and display configuration layout name.
Details display elements in Stage mode: mode, surface, gear, revs, and temperatures.
Explains throttle mapping, lights, oil pressure, and water temperature indicators.
Details display elements in Road mode: speed, throttle, brake pressure, and fuel consumption.
Explains indicators for lights, engine rev, gear, and brake pad temperature.
Indicates the currently engaged gear on the mechanic mode display.
Shows the voltage reading from the barrel's strips for sensor calibration.
Step-by-step guide for replacing the barrel sensor and voltage adjustment.
Details engine diagnosis, including spark plug connectivity and synchronisation.
Covers engine synchronisation status and potential faults.
Indicates when outputs are stopped due to current protection.
Icons for blinkers, fog lights, headlights, and hazard lights.
Icons related to engine, gearbox, ECU, and fuel system.
Icons for wipers, horn, radio, starter, and other vehicle systems.
Icons for day lights, electrical windows, beacon, and other auxiliary functions.
Displays oil pressure, atmospheric pressure, water temp, intake air, and richness.
Shows front speeds, barrel voltage, battery voltage, engine RPM, and gear engaged.
Displays throttle pedal percentage and throttle body angle.
Displays front/rear speeds, car speed, and front/rear brake pressures.
Shows throttle pedal and throttle body readings in strips format.
Displays steering angle and barrel voltage information.
Details the SW CHECK/FCT BRK console, including strategies and button functions.
Explains procedures for cranking the engine and operating the fuel pump.
Covers fan operation and provides reminders for auxiliary functions.
Shows throttle mapping settings and BRK button/function status indicators.
Lists parameters, conditions, and messages for various system alarms.
Details parameters, conditions, and messages for system warnings.
Indicates the status of low amperage components being shut down.
Indicates the status of high amperage components being shut down.
Details the status of engine synchronisation, indicating if it's happening or has happened.
Lists specific faults like No Smot signal, Cam wrong position, and missing teeth.
To Next Page
