Need help?Do you have a question about the Pfaff hobbylock 4842 and is the answer not in the manual?
General| Brand | Pfaff |
|---|---|
| Model | hobbylock 4842 |
| Category | Sewing Machine |
| Language | English |
Safety instructions regarding electric shock hazards.
Safety instructions regarding burns, fire, and injury.
List and description of items in the accessory box.
Information on the machine cover and its use for protection.
Instructions for connecting the foot control to the machine.
Instructions for connecting the machine to the power outlet.
Specific safety notes for users in the USA and Canada.
Explanation of the master switch's function and operation.
Instructions for operating the looper cover for access and information.
How to adjust and use the telescopic thread guide.
Use of the cone thread adapter for large thread spools.
How to use thread nets for synthetic threads.
Use of thread unreeling discs for various spool types.
Benefits of using transparent discs for consistent thread feeding.
How to raise and lower the presser foot for fabric insertion.
How to use the thread chain cutter to trim threads.
Correct direction and method for turning the handwheel.
How to adjust presser foot pressure for different fabrics.
Function of the needle thread tension disengaging lever.
Step-by-step guide to removing and attaching the presser foot.
Explanation of left (L) and right (R) needle positions.
Instructions on how to remove and insert needles using tools.
Specifies the required needle system (EL X 705) for the machine.
Guide for routing threads through the machine's guides.
Step-by-step guide for threading the upper overedge looper.
Step-by-step guide for threading the lower overedge looper.
Instructions for threading the needles on the machine.
Crucial information about the correct threading sequence.
Procedure for replacing spools during threading.
Threading paths for 2-thread flatlock and rolled hem programs.
Threading paths for 3-thread overedge and flatlock programs.
Threading paths for 3/4-thread overedge and rolled hem programs.
Threading paths for 2-needle 3-thread and 4-thread overedge programs.
Step-by-step guide for using the automatic needle threader.
How to adjust the stitch width latch for different seams.
Procedure for attaching the converter for specific seams.
How to adjust the seam width using the setting dial.
How to adjust the stitch length.
Explanation of the differential feed mechanism and its use.
Program details for 3-thread overedge and flatlock stitches.
Program details for 2-needle 3-thread and 4-thread overedge stitches.
Program details for 2-thread flatlock and rolled hem stitches.
Program details for 2-thread serging and rolled hem stitches.
Program details for 3-thread overedge stitches.
Program details for 3-thread serging and flatlock stitches.
Program details for 2-needle 3-thread assembly seam.
Program details for 3-thread rolled hem stitches.
Correcting stitch formation for 4-thread overedge seams.
Correcting stitch formation for 3-thread overedge seams.
Correcting stitch formation for 3-thread flatlock seams.
Correcting stitch formation for 2-thread flatlock seams.
Correcting stitch formation for 2-needle 3-thread assembly seams.
Instructions for cleaning the sewing machine components.
Guide for lubricating the machine parts.
How to clean the rubber feet for stability.
Procedure for removing and replacing the upper blade.
Steps for replacing the sewing machine's light bulb.
Cause and solution for needle breakage.
Cause and solution for thread breaks.
Cause and solution for skipping stitches.
Cause and solution for faulty stitch formation.
Cause and solution for machine not operating.
Cause and solution for fabric not feeding evenly or puckered seams.
Cause and solution for fabric not being neatly trimmed.
Feet and plates for beading and sequins.
Feet and inserts for elastic tape and gathering.
Feet for blind hems, piping, and welting.
Holders, arms, guides for fabric manipulation and measurement.
Instructions for using the beading foot.
Using beading foot and bead needle plate for simultaneous serging.
Attachment for sewing elastic tape with gathering.
Instructions for using the gathering/shirring foot.
Instructions for using the blindstitch foot.
Instructions for using the piping and welting foot.
Using the edge guide for seams and cutting bias tape.
Using the gathering/shirring tongue for fabric manipulation.
Using the curved-seam guide for joining curved and straight fabric.
Using the piping and welting attachment for binding.
Detailed technical specifications of the sewing machine.
List of items included in the machine's packaging.
Information about PFAFF and HOBBYLOCK trademarks.
Guidelines for safe disposal and recycling of the product.
Identification of machine parts numbered 24 through 34.
Identification of machine parts numbered 35 through 38.
To Next Page