Spare Parts
When ordering spare parts, always indicate:
• all information on the product nameplate
• description and ordering number according to the spare
parts list
W sensor
for gauge
Ordering
number
Ni sensor
for gauge
Ordering
number
PTR26950
PTR26951
PTR26960
PTR26961
PT120133-T
PT120135-T
PT120134-T
PT120136-T
PTR21950
PTR21951
PTR21960
PTR21961
PT120141-T
PT120143-T
PT120142-T
PT120144-T
Returning the Product
WARNING
Caution: forwarding contaminated products
Contaminated products (e.g. radioactive, toxic,
caustic or microbiological hazard) can be detri-
mental to health and environment.
Products returned to Pfeiffer Vacuum should pre-
ferably be free of harmful substances. Adhere to
the forwarding regulations of all involved coun-
tries and forwarding companies and enclose a
duly completed declaration of contamination.
Products that are not clearly declared as "free of harmful sub-
stances" are decontaminated at the expense of the customer.
Products not accompanied by a duly completed declaration of
contamination are returned to the sender at his own expense.
Disposal
DANGER
Caution: contaminated parts
Contaminated parts can be detrimental to health
and environment.
Before beginning to work, find out whether any
parts are contaminated. Adhere to the relevant
regulations and take the necessary precautions
when handling contaminated parts.
N
WARNING
Caution: substances detrimental to the environ-
ment
Products or parts thereof (mechanical and elec-
tric components, operating fluids etc.) can be
detrimental to the environment.
Dispose of such substances in accordance with
the relevant local regulations.
Separating the components
After disassembling the product, separate its components
according to the following criteria:
• Contaminated components
Contaminated components (radioactive, toxic, caustic, or
biological hazard etc.) must be decontaminated in accor-
dance with the relevant national regulations, separated
according to their materials, and disposed of.
• Other components
Such components must be separated according to their
materials and recycled.
Declaration of Contamination
Legally binding declaration:
We hereby declare that the information on this form is
complete and accurate and that we will assume any further
costs that may arise. The contaminated product will be dis-
patched in accordance with the applicable regulations.
Organization/company
Address
Post code, place
Phone Fax
Email
Name
Company stamp
Date and legally binding signature
Copies: Original for addressee
1 copy for accompanying documents
1 copy for file of sender
Operating fluid(s) used
(Must be drained before shipping.)
The service, repair, and/or disposal of vacuum equipment and com-
ponents will only be carried out if a correctly completed declaration
has been submitted. Non-completion will result in delay.
This declaration may only be completed (in block letters) and signed
by authorized and qualified staff.
Reason for return
Description of product
Type
Part number
Serial number
no
yes
Used in copper process
Seal product in plastic
bag and mark it with a
corresponding label.
This form can be downloaded from our website.
The product is free
of any substances
which are damaging
to health.
yes
Process related contamination of product:
toxic no
1) yes
corrosive no
1) yes
biological hazard no
yes
2)
explosive no
yes
2)
radioactive no
yes
2)
other harmful substances no
1) yes
1) or not containing any
amount of hazardous
residues that exceed the
permissible exposure limits
2) Products thus
contaminated
will not be
accepted with-
out written
evidence of
decontami -
nation.
Precautions associated with
substance
Action if human
contact
Trade/product name
manufacturer
Chemical name
(or symbol)
Harmful substances, gases and/or
by-products
Please list all substances, gases, and by-products
which the product may have come into contact with:
Declaration of Conformity
We, Pfeiffer Vacuum, hereby declare that the
equipment mentioned below complies with the
provisions of the Directive relating to electrical
equipment designed for use within certain vol-
tage limits 73/23/EEC and the Directive rela-
ting to electromagnetic compatibility
89/336/EEC.
Compact Pirani Gauge
TPR 280
TPR 281
Part numbers
PTR26950 PTR21950
PTR26951 PTR21951
PTR26960 PTR21960
PTR26961 PTR21961
Standards
Harmonized and international/national standards and specifi-
cations:
• EN 61000-6-2 (Electromagnetic compatibility: generic
immunity standard)
• EN 61000-6-3 (Electromagnetic compatibility: generic
emission standard)
• EN 61010 (Safety requirements for electrical equip-
ment for measurement, control and labora-
tory use)
Signature
Pfeiffer Vacuum GmbH, Asslar
19 December 2005
Wolfgang Dondorf
Managing director
Berliner Strasse 43
D–35614 Asslar
Deutschland
Tel +49 (0) 6441 802-0
Fax +49 (0) 6441 802-202
info@pfeiffer-vacuum.de
www.pfeiffer-vacuum.net
To Previous Page
Loading...