3
safer performance. Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and if damaged, have repaired by authorized
service facility. Inspect extension cords periodically and replace if damaged.
Keep handles dry, clean, and free from oil and grease.
•
DISCONNECT TOOLS.
Unplug the tool when not in use, when moving tool
from place to place, before servicing, and when changing accessories (such as
blades, bits, cutte
rs) or making adjustments.
•
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to
see that key and adjusting wrenches are removed from tool before turning it on.
•
AVOID UNINTENTIONAL STARTING.
Don’t carry tool with finger on switch. Be
sure switch is off when plugging in.
•
OUTDOOR USE EXTENSION CORDS
.
When tool is used outdoors, use only
extension cords intended for use outdoors and so marked.
•
STAY ALERT.
Watch what you are doing. Use common sense. Do not operate
tool when you are tired or otherwise impaired.
•
CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other
part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or other part that is
damag
ed should be properly repaired or replaced by an authorized service
center. Do not use tool if switch does not turn it on and off.
•
REPAIRS AND SERVICE
.
Repairs, maintenance and any adjustments not
specified in this manual should be performed by authorized service centers or
other qualified service organizations, always using identical replacement parts.
•
USE OF ACCESSORIES AND ATTACHMENTS.
The use of any accessory or
attachment not recommended for use with the tool could be hazardous. Note:
Refer to the accessory section of this manual for further details.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual.
The information it contains relates to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in
death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
To Next Page
Loading...