6
After changing bits or making any adjustment make sure the bit is properly
secured by included wrench.
Loose adjustment devices can unexpectedly shift,
causing loss of control, loose rotating components may be ejected.
Important Electrical Information
Use only an extension cord that will accept the plug on the product. Make sure your
extension cord is in good condition. When using an extension cord, be sure to use one
heavy enough to carry the cu
rrent your product will draw. An undersized cord will
cause a drop in line voltage resulting in loss of power and overheating. A SJT type
cord is required. Cord shall be 14 AWG minimum for general indoor use. This
appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a
qualified electrician. Do not modify the plug in any way. When servicing, only use
identical service parts. Contact Phalanx for a replacement cord set. For proper size
cords see chart below
：
Be sure your power supply agrees with the nameplate marking. 120 Volts AC only
means your tool will operate on standard 60 Hz household power. Do not operate AC
tools on DC. Lower voltage will cause loss of power performance.
Use only Phalanx accessories for high performance.
Other accessories are not
designed for this tool and may lead to personal injury or property damage.
To Next Page
Loading...