Phanteks ENTHOO 719 - Page 17

15
SATA
CONNECTING THE FAN
CONNECTING THE UNIVERSAL FAN HUB
HUB
2.
3.
CONNECT THE FAN HUB 4-PIN INPUT CABLE TO YOUR
MOTHERBOARD FAN HEADER
CONNECT EXTRA FANS TO THE CORRESPONDING CONNECTOR
ON THE UNIVERSAL FAN HUB
CONNECT THE SATA CABLE TO THE POWER SUPPLY
BLACK 3-PIN DC
BLACK 4-PIN PWM
WHITE 3-14-PIN
UNIVERSAL
P HAD TEKS
PRO TIP
PRO TIP
Illilllflll=illlüilliiilil
TO MOTHERBOARD
FANHUBINPUT
TO PSU
Youcanchoosea PWMor DCoutputin the
motherboardsettings.TheFanHubwill
automaticallytranslatethe signalto all connected
3-and4-pin fans. CheckWWW.PHANTEKS.COM/
FAQfor more technical details.
Expandthenumberoffanswith splitter
cablesuptoa maximumof4Atotal power.
Splittercablesaresoldseparately:
PH-CB-Y4P
The White Connector will
provide the RPM signal to the
motherboard.