4
If the power supply unit fails to function properly, please go through the below checklist.
1. Check to make sure the AC cord is properly connected to the AC source and the power supply unit.
2. Check to make sure the AC source is On.
3. Check to make sure the AC On/Off switch on the back panel of the power supply unit in the “I” (On) position.
4. Check and secure all mainboard and peripheral connectors.
ot neewteb ni yaled dnoces 5.0 a htiw semit wef a ”O“ dna ”I“ neewteb delggot eb nac tinu ylppus rewop eht fo kcab eht no hctiws ffo/no CA ehT .5
make sure the power supply unit is reset.
6.
If you are still experiencing difficulties to get the power supply unit to function properly, please visit www.Phanteks.com for further technical support.
Notes
a.
The operation of power supply is a “pull” technology, which means that the unit only provides the power as demanded by the mainboard and the
system components.
b. If there is a mainboard malfunction, the power supply will not turn on.
c. If there is a peripheral component malfunction, the power supply will not provide power to that particular component.
VI. Troubleshooting
b. DO NOT use excessive force to attach the connectors; the connectors are “keyed” so they can only fit one way.
c. Make sure that the connectors lock in tightly and securely.
4. Close the computer case according to the manufacturer's instructions.
5. Plug in the AC power cord provided in the box and switch the AC On/Off switch on the back panel of the power supply to the “I” (On) position.
”NO“ ro )gnilooc dedia-naf( ”FFO“ rehtie ot tes eb nac ylppus rewop eht fo edis kcab eht no detacol nottub rotceles lortnoc naf edoM dirbyH ehT .6
(Hybrid Mode including fanless operation).
.daol metsys yna rednu ylsuounitnoc etator ot naf eht selbane gnittes ”FFO“ ehT .a
.daol metsys detar mumixam eht fo )% 5 ±( % 05 ot pu edom sselnaf ni nur ot ylppus rewop eht selbane gnittes ”NO“ ehT .b
7.
You are now ready to start your computer powered by Phanteks.
To Next Page
Loading...
