Manual Tablet Hardness Testing Instrument - Type PTB 111E
29-02840_01-2011E Page 1 of 4
PHARMA TEST AG +49 6182 9532-600
Siemensstrasse 5 +49 6182 9532-650
D-63512 Hainburg (GER) email@pharma-test.de
www.pharma-test.com
The Manual Tablet Testing Instrument PTB 111E is a dual force mode hardness test
apparatus as it can be used for either linear force or linear speed increase while Tablet
Hardness is tested. It offers a multiple point validation procedure for the built-in digital load
cell.
The instrument is made in strict compliance with the EP <2.9.8> and USP <1217>
Pharmacopoeia.
Enter the nominal test information for Hardness via the PTB 111E keyboard. Select the unit
to measure, Kp, N or Sc, now place the sample onto the Sample Dish and start the test. The
driven jaw will now run forward and touch the tablet to measure the hardness (tablet breaking
force).
The result is immediately displayed and printed to a connected Dot-Matrix or suitable PCL
Type Laser- or DeskJet printer. Repeat this until your series has been tested, get a full print
including each individual result, mean value and deviations.
The flexibility and the reproducibility of the results have made this and other models, like the
PTB311E series to become one of the most sold hardness testers.
To Next Page
Need help?
General
