Need help?Do you have a question about the PHAROS MARINE PHALCON 2000 and is the answer not in the manual?
General| Brand | PHAROS MARINE |
|---|---|
| Model | PHALCON 2000 |
| Category | Marine Equipment |
| Language | English |
Details on tools and consumable materials required for installation, including torque wrench, multimeter, laptop, sealant, and grease.
Briefly outlines that little maintenance is needed after installation and commissioning, recommending inspection as detailed in a companion handbook.
Lists necessary equipment for diagnostics and repair, including a multimeter and a serial terminal with RS 232 interface.
Covers the process of installing the Phalcon 2000, including unpacking, inspection for transit damage, and the installation kit contents.
Describes the self-test, calibration, and operational checks performed by the Phalcon 2000 upon initial switch-on.
Recommends that personnel stay at least 1 metre away from the Phalcon 2000 during its operation.
States the company's limitations on liability for personal injury and errors, and notes potential for document updates.
Defines the Phalcon 2000 as a radar transponder (RACON) triggered by marine radar signals, responding with a coded signal for identification.
Lists potential mounting locations such as lighthouses, buoys, bridges, and offshore platforms for navigation aids.
Instructions for horizontal mounting using three M12 tapped holes, specifying compatible materials and screw tightening torque.
Details on connecting the unit to an earth grounding structure, including specific methods for buoy mounting.
Specifies DC power range (9-36V), common 12V battery supply, and critical notes on pin 6 function for power connectors.
Describes the junction box containing an RS 232 serial connector for system connection and status monitoring via laptop.
To Next Page