ASSEMBLY INSTRUCTIONS
IMPORTANT Before beginning assembly, please read and understand the warnings listed on the next page.
Failure to read and understand these warnings could lead to bodily harm and/or injury. The Phase 3 Models Squall EDF, is
not intended for those under 14 years of age, unless closely supervised by an adult.
Includes High-Performance
Brushless Motor, Ducted Fan
Assembly and Brushless
Electronic Speed Controller
SPECIFICATIONS AND FEATURES
Wingspan: 650mm (25.6”)
Length: 885mm (34.8”)
Weight RTF: Squall! 600~650g (21.2~22.9oz)
Squall! HP 650~780g (22.9~27.5oz)
Motor RPM: 45,000~50,000
Motor: Squall! - 3800KV (11.1v) Brushless
Squall! HP - 3400KV (14.8v) Brushless
ESC: Squall! - 40A (11.1v) Brushless
Squall! HP - 45A HP (14.8v) Brushless
Radio Required: 4 channel with elevon mixing and three
9~10g micro servos
Battery Required: Squall! - 3 cell 2500mAh 20C Li-Po
Squall! HP - 4 cell 2500mAh 20C Li-Po
• Moulded Lightweight Airframe
• High-Efficiency Ducted Fan Unit Included
• High-RPM Brushless Motor Included
• 45 Amp Brushless Speed Controller Included
• Extensive Decal Sheet Included
• Fast and Easy Assembly
• Over 100 High-Resolution Colour Photos to Guide You
CAUTION The Phase 3 Models Squall EDF is designed for intermediate to advanced pilots. It is not intended for beginners.
It is not a trainer!
High performance EDF model with
3800KV motor and 5 bladed fan
for 3 cell Li-Po batteries.
Super-high performance EDF model with 3400KV
motor and 3 bladed fan for 4 cell Li-Po batteries.
4 Cell Version
3 Cell Version
© 2009, Phase 3 Models - All Rights Reserved
Version 1 May 2009
Phase 3 Models
P.O. Box No. 402
Texaco Road PO
New Territories, Hong Kong
Made in Taiwan
Squall! EDF ARTF - Product Number PH019
Squall! HP EDF ARTF - Product Number PH020
To Next Page
General