Need help?Do you have a question about the Phase Velocity Series and is the answer not in the manual?
Guidance on optimal speaker placement for stereo listening.
Tips for positioning speakers in rectangular rooms for best sound.
Connecting subwoofer via 'Subwoofer Out' or 'Pre-Amp Out' on receiver.
Connecting subwoofer directly to speaker output terminals.
Features like Power/Auto-off, Level, Crossover, and Phase controls.
Includes Servo Control for protection and LFE input for receiver connection.
Basic checks for components being plugged in and turned on.
Troubleshooting speaker polarity and placement obstructions.
Checks for subwoofer power, connections, and volume settings.
Adjusting subwoofer volume, crossover, and placement.
Addresses high volume issues and potential amplifier underpowering.
Speaker design using port airflow to enhance bass reproduction.
The central speaker in a home theater setup for dialogue.
Circuit that splits audio signals to different speaker drivers.
Describes pitch of sounds, measured in Hertz (Hz).
Low Frequency Effect input for subwoofer control.
A separate speaker box for producing deep bass frequencies.
The speaker driver handling high (treble) frequencies.
The driver producing low (bass) frequencies.
To Next Page
General