.
.
(J)×1 PCS
(L)x1 Wrench
(O)×2PCS (P)×2PCS
The parts and hardwares below have been included for assembly
TABLE ASSEMBLY STEPS
M6x35 8PCS
.
.
ASSEMBLY STEPS
Step 1：Match the two(2) holes of parts A and B. Insert the screws and twist
by L. Do not fully tighten all screws until assembly is complete.
Step 2：Match the four(4) holes of parts C and A. Match the three(3) hole
of parts C and B.Insert the screws and twist by L. Do not fully tighten
all screws until assembly is complete.
Screws Assembly Steps
match the two different
holes
insert screws tighten the screws by
included wrench
Important: Do not fully tighten all screws until assembly is complete.
B
A
B
A
AB
C
A
B
C
To Next Page
Loading...
