4. Assembly manual
The Main Sail Halyard
The main sail halyard is threaded in the boltrope
(see photos), up to the masthead after removing
the sheave. It is then passed in the masthead
after having been slid into the sheave. It comes
down again and passes into the flying pulley
(#224) equipped with a shackle (# 27.04), which
will be used for fixing the head of the main sail. It
then goes back up then up to the masthead
where it is fixed by a simple knot. The reefing of
the main sail halyard is accomplished
To Next Page
Loading...