7) To adjust the balanced pincushion, press the or button.Press to confirm.
8) When the balanced pincushion is adjusted, press the
button to return to the ADJUST
SHAPE window. BACK TO MAIN WINDOWS will be highlighted.
9) Press the
button to return to the MAIN CONTROLS window, or press the button until
ADJUST SIDE ANGLES is highlighted.
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options.
These two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when
the picture is not square.
1) Press the
button on the monitor. The MAIN CONTROLS window appears.
2) Press the
button until ADJUST SHAPE is highlighted.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (11 of 24)7/15/2004 5:33:25 PM
To Next Page
Loading...
